Integrated Security Enclosure

HD Protech designed the integrated security enclosure (ISE) based on our customers’ request to resolve two primary issues: Remote management without communication and reduce installation cost through simplifying set ups and deployment.

Current deployment of security enclosures still relies of the back end management to manage issues of devices connected and powered by the enclosure. HD Protech resolves this issue by having intelligent self-aware software inside the enclosure to manage the devices “at the edge”.

HD Protech’s device management services (DMS) monitors and react accordingly to issues with devices (cameras, encoders, sensors, etc.) without any user intervention. DMS can operate in a standalone mode or a management mode. DMS is aware if communication is down, the unit will operate as a standalone unit. Once communication is restored, it will connected and send all logs and/or alerts to the backend management. Also, using HD Protech’s management, you will have a device operating history showing any imminent component failure that needs replacing. For example, Camera A has been operating for the last 6 months but the logs show it’s been restarted eight times in 24 hours. The health monitor will show the camera as yellow giving the Operator reason to monitor the camera closely.

We designed the ISE to be easily configured by using similar operating systems that most installers are used to working with, Windows®. We standardized on connectors that are easily installable in the field while minimize electrical shocks. Windows interface allowing the administrator and installers to easily configured the enclosure for deployment.

Unlike other manufacturer solutions, the administrator can view the ISE unit while the unit is not power on. Remote power on/off is standard. The administrator can console into the unit and review boot process at his or her desk while the unit is hundreds miles away1.

Our goal was to allow the installation to be completed without having to open the enclosure to hardwire or make changes. In our experiences, the rule is always powered down the unit before installing. Unfortunately, the installers tend to forget sometimes, therefore all input power plugs to the enclosure as well as all output power from the enclosures are female to avoid accidentally touching exposed pins. All connectors are color coded to represent either AC or DC output power. All connectors are field installable using a crimper tool.

Connectors are twist locked for easy single twist connect and disconnect. From the development of ISE, there is one additional benefit. You can now load your own software to run on the unit.

The original design was for used as a low power LPR processor, however, the ISE can serve as a network video recorder (NVR) or ITS server as well.

Molded Polycarbonate industrial Enclosure, quick release latches, NEMA Type 3R, 3RX / IP24 rated, fully gasket raised Vented lid with removable filters & integral mounting flange.

Features aluminum mounting plate with surge protected duplex 120/208 VAC Outlets & Thermostat Controlled Heating & Cooling System.

Three different processor types area available:
Atom C2750 2.4GHz 8 Core, Intel i5-3880M 2.9GHz 2 Core/4 Threads, and Intel Xeon E3-1240 3.4GHz 4 Core/8 Thread.

Each ISE can be used in a standalone or network environment, Embedded Windows® 7 Operating System, and Ethernet switch.

The system is capable of handling up to Twelve (12) cameras*.

Easy to connect cabling system allows for faster installs. Also, each unit is fully configured making it easy for customers to configure and set up each unit within 30 minutes.

Just add your own software or use HD Protech application licenses and pre-configured options:
LPR, Overview and/or Occupant cameras.

Build-to-Order (BTO) units are available, please contact our sales rep or partners for additional assistance.

*Xeon E3-1240 records videos or detect plates with up to Twelve (12) Cameras and Atom C2750 records videos or detect plates with up to Eight (8) cameras.

1 Requires WiFi Internet or 4G/3G cellular data services.

ISE Features

Complete And Ready To Deploy
Intelligent Self-Monitoring Services
Logs

· NEMA 3R/IP24 enclosure with fan and heater

· Available Embedded 4/8 Core Processor

· Windows® 7 Embedded OS with DR Recovery USB

· Hot swap 256GB SSD Storage (upgradable)

· Chassis intrusion alarm

· Available with 4 or 8 GigE Switch PoE Ports

  • Web Managed or SNMP
  • DHCP client and server

· Available with 4 or 8 H.264 Hardware Encoder

· IP66/67/68 Weatherproof Connector

  • (4 to 8) CAT5/6 – Baluns for analog cameras
  • (4 to 8) CAT5/6 – Ethernet Ports
  • CAT5/6 – Remote Console (Certain models only)
  • Fiber (SM or MM)
  • USB 3.0
  • (up to 8) 12VDC / 24VAC Output

· Available with dual band HP 3×3 a/b/g/n module

· Available with certified carrier 4G/3G embedded router or customer install USB Modem

  • Certified for Verizon/ATT/Sprint and International carriers1

· Camera and equipment power controls.

· Remote Access2 without system being on

· Remote boot2 without system being on

· Connect to console screen without having to open the enclosure (GUI)

· Support 12VDC and 24VAC cameras

· Pole mount included (2” to 12” diameter poles)

· Analog camera support including RS234/RS485 (up to 2 ports available)

· Optional Radar embedded module to capture speed

· Optional Outdoor UPS battery backup

· 120VAC (US) and 208VAC (International)

· Standalone deployment or Optionally: Monitor and managed using CMSS™ in a public or private network deployment

 

1Must have contract with provider.

2Requires WiFi Internet or 4G/3G cellular data services

 

 

 
ISE ModelsISE-PW18A8-XXXXISE-PW18E3-XXXXISE-PW18A8-08LPISE-PW18A8-12LPMISE-I5-MDL1
Enclosure TypePolycarbonatePolycarbonatePolycarbonatePolycarbonatePolycarbonate
NEMANEMA 3RNEMA 3RNEMA 3RNEMA 3RNEMA 3R
HeaterOn at 10°C (50°F)
Off at 20°C (68°F)
On at 10°C (50°F)
Off at 20°C (68°F)
On at 10°C (50°F)
Off at 20°C (68°F)
On at 10°C (50°F)
Off at 20°C (68°F)
On at 10°C (50°F)
Off at 20°C (68°F)
FanOn at 35°C (95°F)
Off at 20°C (86°F)
On at 35°C (95°F)
Off at 20°C (86°F)
On at 35°C (95°F)
Off at 20°C (86°F)
On at 35°C (95°F)
Off at 20°C (86°F)
On at 35°C (95°F)
Off at 20°C (86°F)
Power Type120VAC - 50W (heater)240VAC120VAC - 50W (heater)240VAC120VAC
Lock TypeQuad LatchQuad LatchQuad LatchQuad LatchQuad Latch
VentsServicableServicableServicableServicableServicable
RF ProtectionYesYesYesYesYes
Mount Type (indicate when order)Wall or up to 12" PoleWall or up to 12" PoleWall or up to 12" PoleWall or up to 12" PoleWall or up to 12" Pole
Dimension61 x 61 x 51cm (24" x 24" x 20")61 x 61 x 51cm (24" x 24" x 20")61 x 61 x 51cm (24" x 24" x 20")61 x 61 x 51cm (24" x 24" x 20")51 x 51 x 41cm / 20" x 20" x 16"
Weight25252525.37kg / 16lbs
ProcessorAtom C2750 - 2.4GHz (8C)Atom C2750 - 2.4GHz (8C)Xeon E3-1240 3GHz (4C/8T)Atom C2750 - 2.4GHz (8C)i5-3380M 2.9GHz (2C/4T)
Memory8GB RAM (up to 32GB)8GB RAM (up to 32GB)8GB RAM (up to 32GB)8GB RAM (up to 32GB)8GB
Drives (OS Boot and Storage Data)(SSD) 64GB-OS / 256GB-Data(SSD) 64GB-OS / 256GB-Data(SSD) 64GB-OS / 256GB-Data(SSD) 64GB-OS / 256GB-Data(SSD) 32GB-OS / 256GB-Data
Easy swappable storageStandard 2 Optional 4Standard 2 Optional 4Standard 2 Optional 4Standard 2 Optional 4Standard 2
Ports (IP66) - Located at bottom of each enclosure for easy access(2) USB, (8) CAT5E, (1) RJ45, (8) LP DC/AC(2) USB, (8) CAT5E, (1) RJ45, (8) LP DC/AC, (2) LC Fiber(2) USB, (8) CAT5E, (1) RJ45, (8) LP DC/AC, (2) LC(2) USB, (8) CAT5E, (1) RJ45, (8) LP DC/AC, (2) LC Fiber(2) USB, (4) CAT5E, (1) RJ45, (4) LP DC/AC
Fiber ConnectionUpgradable10km SM LCUpgradable10km SM LCUpgradable
Wireless ModuleNone (upgradable)None (upgradable)None (upgradable)None (upgradable)None (field upgradable)
4G/3G RouterNone (field upgradable)None (field upgradable)None (field upgradable)None (field upgradable)None (field upgradable)
4G/3G CompatibleAny Provider's USB Modem(Verizon/ATT/Sprint/Others)Any Provider's USB Modem(Verizon/ATT/Sprint/Others)(Verizon/ATT/Sprint/Others)
Ethernet Switch8 Port8 Port8 Port8 Port8 Port
Operating SystemWindows® Embedded 7Windows® Embedded 7Windows® Embedded 7Windows® Embedded 7Windows® Embedded 7
Power (Hardwire)120VA (240V available)120VA (240V available)120VA (240V available)120VA (240V available)120VA (240V available)
Warranty / Extended Available1 Year / Yes1 Year / Yes1 Year / Yes1 Year / Yes1 Year / Yes
Integrated UPSNone (field upgradable)None (field upgradable)None (field upgradable)None (field upgradable)None (field upgradable)
Teamviewer ClientYes for HD Protech SupportYes for HD Protech SupportYes for HD Protech SupportYes for HD Protech SupportYes for HD Protech Support
LPR Camera Limit88888
Occupant Camera SupportOptionalOptionalOptionalOptionalOptional
LPR InterfaceIP Communication OnlyIP Communication OnlyIP Communication OnlyIP Communication OnlyIP Communication Only
Unit ManagementRemote Access via WebRemote Access via WebRemote Access via WebRemote Access via WebRemote Access via Web
Management ControlOptionalOptionalOptionalOptionalOptional
Estimated Street Price$5,675.00$7,203.00$5,899.00$7,323.00$5,272.00
buy nowbuy nowbuy nowbuy nowbuy now

 

*The information contained herein is subject to change without notice and is provided “as is” without warranty of any kind. The warranties for HD Protech products are set forth in the express limited warranty statements accompanying such products. Nothing herein should be construed as constituting an additional warranty. HD Protech shall not be liable for pricing, technical and editorial errors or omissions contained herein.